How Replace Color Cartridge on Epson 600Q Stylus ? The Epson Stylus 600Q is an inkjet printer that uses an ink cartridge Epson S020093 Epson S020089 black and color ink cartridge. The cartridges are housed in slots in the carriage is in the inside right of the printer - black in the slot on the left and the right color. Color cartridge replacement is necessary when the "color ink" or flashing light is on and when the cartridge is more than six months and the production of low quality or faded prints.
Instructions
1 Turn on the Epson 600Q. Fold down the output tray and lift the printer cover.
2 Press the "cleansing" in the control panel for at least three seconds. Wait for the cartridge carrier to slide to the left of its rest position under the housing right side of the printer and the "Power" light will flash. If you want to remove a used cartridge, press the "Load / Eject" button instead.
3 Place your finger on the tab on the front of the cartridge slot and lift color ink cartridge cover.
4 Lift the cartridge slot, reserved for disposal.
5 Remove the color cartridge from its packaging. Hold the yellow tape at the top of the cartridge and gently pull it.
6 Place the new cartridge over the color cartridge slot with the arrow on the top label facing the printer. Insert the cartridge into the slot and then put on the lid and press firmly into place.
7 Press the "Clear" and lower the top of the printer in its original position to begin charging the ink. Wait about two minutes. When the "Power" light stops flashing and you can not hear the charging process will start printing again.
Tag: How Replace Color Cartridge on Epson 600Q Stylus